Central Air Conditioning in Saskatoon
If you’re in the market for a new central air conditioning system in Saskatoon, Saskatchewan check out our city specific information. Compare prices, request a quote, and get the details on dozens of local HVAC companies.
Other Articles You May Find Helpful:
Table of contents
- Other Articles You May Find Helpful:
- Average central air conditioner cost in Saskatoon (including installation):
- Saskatoon In A Nutshell
- Top Brands by Price Tier
- What to look for when choosing a heating & air conditioning contractor
- Who Are Our Top Saskatoon Air Conditioner Contractors?
- Deals Available
- Air Conditioning Glossary
- Saskatoon City Info
- Saskatoon & Surrounding Areas
Average central air conditioner cost in Saskatoon (including installation):
$3000 – $5500
The price of a new air conditioner can vary depending mostly on size and brand. The average A/C unit cost in Saskatoon, Saskatchewan ranges from: $3000 to $5500 (including installation). Remember to include the cost of installation when comparing pricing.
Higher than average
Slightly above-average price range, which may be due to factors like a more complicated installation, or purchasing a top-of-the-line unit or premium brand.
Typical price range: 3000 – 5500
The average price range for a typical high-efficiency unit with a typical installation from an established, fully licensed & insured local HVAC contractor. Prices will vary within this range based on installation factors, brand & model, unit size/BTU output & efficiency, among other things.
Lower than average
Below-market pricing; be careful if the price is exceptionally low. The lower the price is below average, the higher likelihood that you may receive a more hastily done installation, low-end or used components, limited labour warranty coverage & ongoing support, or the company may be less established or lacking in insurance and/or licensing & certification.
Saskatoon In A Nutshell
- Population: 255,000
- Average Temp. Summer: 23 degrees
- Average Temp. Winter: -14 degrees
Top Brands by Price Tier
- Low – to $3,800 Goodman
- Mid – Up to $4,500 American Standard
- Premium – up to $6,000+ Lennox
What to look for when choosing a heating & air conditioning contractor
People often fret over the brand of air conditioner to buy, but choosing the best contractor in Saskatoon is every bit as important. Not only is the quality of the workmanship and installation crucial to the air conditioner’s lifespan, the company you choose will be relied on for future servicing and warranty coverage.
Always choose an established company that has:
- Good, independently-verified feedback
- A solid track record and no outstanding disputes
- Verified insurance, licenses, and certifications
- Experienced staff, with manufacturer training
- Registered to offer rebates
Checking all of these things is difficult and time-consuming.
That’s why we’ve already done it for you!
Learn more about our independent local HVAC contractor Certification program, designed to help you get a reliable heating system at a fair price, from reputable local dealers.
Who Are Our Top Saskatoon Air Conditioner Contractors?
About Gibbon Heating:
- Established, with a great track record
- Amazing feedback from verified customers
- Experienced and well-trained staff
- Fully licensed, bonded, and insured
A/C season deal – Free duct cleaning with the purchase of an a/c
Also available affordable leasing & finance options
If you’re looking to replace or install a new central air conditioning unit, financing is an option that is available. Some HVAC companies provide varying terms, request a quote from one of our recommended trades. Companies that offer financing will have several different payment plans available to suit each homeowner’s needs. Financing contract terms can be negotiated to cover a wide range of options, including interest rate and payment terms that can be spread out from 1 to 15 years. Make sure you ask for a free quote from at least two suppliers before committing to an agreement.
Get FREE Quotes from Certified Local Contractors!
When purchasing a central air conditioning system from your local HVAC supplier it’s important to factor in the cost of installing the system. Due to the complexity of a central A/C unit, installation should only be completed by a recognized HVAC professional. Attempting to self-install may result in a system that does not function properly, could potentially damage your home, and in most cases would void any type of warranty issued by the manufacturer. Search from our extensive trade database for a certified HVAC technician who will ensure your air conditioner is installed and performing correctly.
Air Conditioning Glossary
Sometimes the technical terms for equipment and processes can be confusing, especially when discussing or describing air conditioners. We have put together a glossary of common terms that are routinely used by HVAC suppliers in Saskatoon to give you a head’s up when it comes to A/C lingo.
The part of the A/C system that moves cool air through a building’s ducts, located inside the building, includes a blower and dampers that direct air flow
Stands for British Thermal Unit, the measurement used to rate the amount of heat that is removed from a space, the higher the number the greater the cooling power
Air conditioning equipment located outside the building, collects and dispels heat from inside to outside, houses a fan and cooling fins
A plate located within a building’s ducts that controls the amount of air flow passing through. t It can stop and/or regulate the speed of air flowing through a duct, and is useful for increasing or decreasing cooler air to rooms that are used more or less
Removing water vapour from the air through the use of an electrical appliance (dehumidifier), reducing humidity, controls the amount of water moisture in the air, too much water in the air can lead to mildew and mold growth
Used to carry air to and from a building via the air conditioning system, usually made of sheet metal, can be round or square
Type of air conditioner that does not use ducts to move cool air throughout a building, condenser unit is hooked up directly to an air handler located inside the building, cools a single space only
Stands for Energy Efficiency Ratio, a number that represents how many BTUs per hour are used for each watt of power drawn, used mostly for window A/C units
A designation meaning that the air conditioner is highly efficient–it has met strict performance criteria set out by the government, specifically related to energy efficiency
A device used to remove dust and other air particles and debris so they do not enter and clog cooling equipment, removable, replaceable part, requires regular cleaning in order to maintain and prolong proper running of air conditioning equipment
Latent Cooling Capacity
An air conditioning unit’s ability to remove moisture from the air, signifies the cooling capacity an air conditioning system needs in order to effectively reduce the moisture in the air or humidity of a building
A measurement which explains the percentage of moisture in the air versus the air’s maximum amount that can be held at the same temperature
The path of air that is displaced by incoming cooled air takes to return to the air handler so it can circulate back into the system, vents filter out particles picked up from air that is circulation throughout a building
Stands for Seasonal Energy Efficiency Rating, a measurement of a home air conditioning system’s cooling efficiency, calculated by taking the cooling output divided by the energy consumed in watt hours, rating is in between 13 to 21–a higher number means greater energy efficiency
A two-part air conditioning system that has a condensing unit outside connected to an air handler inside, can be used to cool only one room at a time, less noise than central air conditioning system
A device used to monitor and control hot and cold temperatures through the use of sensors, monitors a building’s air and/or environment, can be programmed to aid in pre-set temperature regulation (some new system’s allow this to be done remotely)
An area of a home or building that has its own thermostat to control temperature, allows for specific control and temperature regulation with programming
Saskatoon City Info
With a population of approximately 255,000 residents, the city of Saskatoon is the largest city in the province of Saskatchewan. The South Saskatchewan River winds directly through the heart of the city, while seven bridges join the east and west banks. In 2018, the New York Times named Saskatoon #18 on their “52 Places to Visit in 2018” list. With events like the Sundog Arts and Entertainment Faire it is easy to see why. The city has a fairly dry climate with below average levels of humidity. Winters are known to be long and cold, even by Canadian standards. Summer time sees a brief spike in temperature with July and August usually hitting temperatures well into the 30-degree range. When those hot periods hit, city residents welcome the cool relief their air conditioning units provide. To find out more information regarding A/C units in Saskatoon contact a local HVAC provider.
Saskatoon & Surrounding Areas